Nitro OBD2 Tuning Chip — Removes Throttle Delay, Faster Acceleration
Order Now
Nitro OBD2 Tuning Chip
Limited Launch // 25% Off
Step 1: Select Engine Type
RequiredTick one box below before you order.
₱1,799₱2,399
Free nationwide shipping via J&T. Cash on Delivery available. Ships within 24 hours from Manila.
1
Select engine type above- ✓ Lifetime warranty
- ✓ Free Shipping Nationwide
- ✓ Secure checkout
- ✓ COD nationwide PH
WARRANTY
Lifetime Warranty
PAYMENT
Cash on Delivery
LOGISTICS_PH
Free Shipping Nationwide
CHECKOUT
Secure & Encrypted
Disclaimer: Performance improvements may vary depending on vehicle condition and driving habits.
Engineered for Your Vehicle
Check Compatibility
Compatibility Check
Diesel & Gas
Two variants — one platform
Actual Product Packaging
Real product photography
Plug & Drive
Under the dashboard
Installation Video
How To Install.
Watch how simple plug-and-play really is.
Verified Feedback
Real Customer Reviews
& Verified Feedback
See what real Nitro OBD2 MNL II customers are saying after installing the Nitro OBD2 Tuning Chip.
✓ 100% Verified·Screenshots from real customers
Order Now
Nitro OBD2 Tuning Chip
Limited Launch // 25% Off
Step 1: Select Engine Type
RequiredTick one box below before you order.
₱1,799₱2,399
Free nationwide shipping via J&T. Cash on Delivery available. Ships within 24 hours from Manila.
1
Select engine type above- ✓ Lifetime warranty
- ✓ Free Shipping Nationwide
- ✓ Secure checkout
- ✓ COD nationwide PH
✓
Lifetime Warranty✓
Cash on Delivery✓
Secure Payment✓
Fast PH Shipping✓
Customer Support✓
Nationwide DeliveryFrequently Asked
Questions.
Does it void my vehicle warranty?+
No. The Nitro OBD2 plugs into your OBD2 diagnostic port with zero permanent modifications. It can be removed at any time.
How long does shipping take?+
Metro Manila: 2–3 business days
Luzon: 3–5 business days
Visayas & Mindanao: 7–10 business days
Remote Islands: 10–14 business days
Luzon: 3–5 business days
Visayas & Mindanao: 7–10 business days
Remote Islands: 10–14 business days
Can I remove it anytime?+
Yes. Simply unplug — your vehicle instantly returns to stock settings. No trace on the ECU.
Will it work on diesel engines?+
Yes. The Nitro OBD2 is tuned for both diesel and gasoline engines. Diesel SUVs and pickups see especially strong response gains.
Do I need professional installation?+
No. Installation takes under 60 seconds. Locate the OBD2 port beneath your dashboard, plug in, and drive.
Is Cash on Delivery available?+
Yes — nationwide COD via J&T. Pay only when you receive and inspect the unit.
Why is the LED still on even when the engine is turned off?+
This is completely normal. Some vehicles continue supplying power to the OBD2 port for a short period after the engine is turned off. The LED will automatically turn off once the vehicle enters sleep mode.
How do I know if the installation was successful?+
After plugging the Nitro OBD2 into your vehicle's OBD2 port, the LED indicator should light up. This confirms that the device is receiving power and is properly connected. For best results, drive your vehicle normally for approximately 150–200 km to allow the ECU to adapt.
Will the Nitro OBD2 drain my car battery?+
No. The Nitro OBD2 is designed with very low power consumption. It enters a low-power or sleep state together with your vehicle, so it will not drain your car battery under normal operating conditions.
Can I leave the Nitro OBD2 plugged in all the time?+
Yes. The Nitro OBD2 is designed to remain connected to your vehicle's OBD2 port for continuous operation. There is no need to unplug it after every drive.
Can I remove the Nitro OBD2 during PMS?+
Yes. Simply unplug the Nitro OBD2 before your vehicle's preventive maintenance service (PMS) or dealership visit. After the service, plug it back into the OBD2 port and continue using it as normal.
Where is the OBD-II Port Located?+
Most vehicles have the OBD-II port located under the driver’s side dashboard, within easy reach while seated in the driver’s seat.
Common locations include:
• Under the steering wheel
• Below the dashboard near the pedals
• Behind a small plastic cover
• Beside the fuse box
• Near the center console (some vehicles)
If you cannot locate the port, please refer to your owner’s manual or contact our support team for assistance.
Common OBD-II Port Locations
Common locations include:
• Under the steering wheel
• Below the dashboard near the pedals
• Behind a small plastic cover
• Beside the fuse box
• Near the center console (some vehicles)
If you cannot locate the port, please refer to your owner’s manual or contact our support team for assistance.
Common OBD-II Port Locations
Under Steering Wheel
Below Dashboard
Beside Fuse Box
Behind Plastic Cover
Tap any image to enlarge.What Does an OBD-II Port Look Like?+
The OBD-II port is a 16-pin trapezoid-shaped diagnostic connector.
It usually has:
• 16 small metal pin slots
• Black plastic housing
• Trapezoid shape (one side slightly wider)
• No cover on most vehicles (some have a small protective cap)
The Nitro OBD2 device plugs directly into this port without requiring any wiring or modifications.
16-Pin OBD-II Port
It usually has:
• 16 small metal pin slots
• Black plastic housing
• Trapezoid shape (one side slightly wider)
• No cover on most vehicles (some have a small protective cap)
The Nitro OBD2 device plugs directly into this port without requiring any wiring or modifications.
16-Pin OBD-II Port
16-Pin OBD-II Port
Tap image to enlarge.How do I know if my vehicle has an OBD-II port?+
Most modern vehicles are equipped with an OBD-II port.
If your vehicle has a 16-pin OBD-II diagnostic connector, it is likely compatible with the Nitro OBD2 device (subject to vehicle compatibility).
You can also use our Compatibility Checker or contact our support team to verify compatibility.
If your vehicle has a 16-pin OBD-II diagnostic connector, it is likely compatible with the Nitro OBD2 device (subject to vehicle compatibility).
You can also use our Compatibility Checker or contact our support team to verify compatibility.
Ready for Deployment